axial strain

The axial strain increases and strength decreases as water content increases.

随着含水量增加,土样的塑性应变量增加,强度减小.

互联网摘选

We analyzed in detail about axial strain temperature and transverse pressure sensitivity of polymer LPG.

详细讨论了聚合物长周期光纤光栅轴向应变、温度和横向压力响应.

互联网摘选

Using the resonant column triaxial test and static triaxial test results, and based on elastic theory for 1% of axial strain, the deviator stress and G max are found to be related.

同时本研究利用静力三轴试验结果，以弹性理论推求于轴应变为1%时所对应之偏应力与最大剪切模量具有相关联性。

互联网摘选

( b) For concrete in compression zone a stress-strain relation for repeated axial compressive cyclic loading, is adopted instead of that for reversed loading.

对混凝土受压区采用轴向重复加载的应力-应变关系而不是反复加载的。

互联网摘选

Based on the stress-strain relationship established from tri-axial tests, the tangent modulus and secant modulus are derived from the unified mathematical expression.

以三轴剪切试验测得的应力-应变关系为基础，从统一的表达式推出了割线模量和切线模量表达式。

互联网摘选

Commonly, ultrasound elastography can only obtain the axial strain distribution of tissues with an external compression.

超声弹性成像通常只能得到组织在外部压缩作用下的纵向应变分布.

互联网摘选

On the state of low confining pressure, volume shrink happens first and cubic dilation develops gradually with the increase of axial strain.

在低围压状态下，剪切过程中先出现体积收缩，随着轴向应变的增加，逐渐转为体积膨胀。

互联网摘选

Based on the experimental research of the axial tensile stress-strain curve for third grade concrete, a loading device that may be applied in the research of concrete for all grades and the loading method are proposed.

通过对三级配混凝土轴向拉伸应力～变形全曲线的试验研究，提出了可以推广应用于全级配混凝土相应试验研究的加载装置和加荷方式。

互联网摘选

An innovative method is proposed for measuring axial force of hydrodynamic coupling by virtue of measuring axial strain of thrust plate.

首次提出并采用通过测量推力盘轴向应变来测量液力偶合器轴向力的方法。

互联网摘选

The result shows that the tangent Poisson's ratio computed with the relationship proposed by Daniel is in conformity with the testing data, but the value obtained by assuming the relationship between the axial strain and lateral strain as hyperbola differs from the testing data.

试验还表明，高压力下的切线泊松比，用但尼尔建议的方法进行计算与实测资料相符，用轴向应变与侧向应变为双曲线关系的假设进行计算则相差较大。

互联网摘选